Using C.A. Technologies

14:1 Bobcat Peak Performance Fine Finish Pump

This pump is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications. The new 14:1 Peak Performance Series pump incorporates a new completely redesigned air motor that features a stationary magnet poised for endurance and longevity. This simple direct acting valve is also resistant to icing, has a long life carbon fiber cylinder and integrated noise suppression design for quiet operation. The fluid section is all stainless featuring a non-contact pump tube that never wears out. Also featured is a cartridge style piston seal and guide for quick field replacement. Unit has a large capacity solvent cup and 360 degree fluid inlet/outlet orientation.

• Pump ratio – 14:1
• Max air pressure – 107 psi
• Max fluid pressure – 1500 psi
• Fluid volume – 1/3 GPM per cycle (supports one gun up to .024 orifice size)

(Fine Finish)

C.A.Technologies is proud of tje CAT-Xpress, a professional grade pressure feed spray gun. It provides extreme atomization, lightweight, handle ergonomics, quick adjust fan control, and fluid delivery superior to all the competitive guns on the market today. The CAT-Xpress includes the HVLP air cap and the pressure reduced air cap to meet all the codes and regulations throughout the U.S.

• Air inlet – 1/4” NPS (m)
• Fluid inlet – 3/8″ NPS (m)
• Weight – 20 oz.
• HVLP air caps – requires 9 cfm @ 26 psi
• Pressure reduced air caps – requires 9 cfm @ 29 psi

(Fine Finish)

The CAT-X provides extreme atomization, handle ergonomics, and fluid delivery superior to all the competitive guns on the market today. The CAT-X includes the HVLP air cap and the pressure reduced air cap to meet all the codes and regulations throughout the United States. The CAT-X comes in five distinctive handle designs, allowing you to customize your finishing experience. Model “B” is black anodized with a teflon™ hard coat for an easy clean.

• Air inlet – 1/4” NPS (m)
• Fluid inlet – 16mm x 1.5mm (f)
• Weight – 20 oz.
• 24-1411 – requires 13.5 cfm @ 29 psi
• 24-1352 – requires 11.0 cfm @ 35 psi
• Only available in a CAT Pack or E-Pack

Teflon Hard Coated

The P100G is a general purpose conventional air spray gun designed for glue/adhesive applications of all types. The air caps are available in a PTFE anodized for easy clean-up and longer life. Guns feature self-adjusting needle packings, inexpensive nozzle replacement and rugged construction.

• Air inlet – 1/4” nps (m)
• Fluid inlet – 3/8 nps (m)
• Weight – 20 oz.
• Teflon hard-coated body
• cfm is dependant on air cap

Tank

The Bandit is by far the best 2 quart in the industry and at the right price. The band clamp offers 360 degrees of sealing pressure with the turn of one knob, no threads to stick and no multiple lid knobs to turn. Comes with a rigid liner for quick color change and cleaning. The underside of the lid, fittings and fluid tube are all 300 series stainless steel and include a splash guard so you don’t have to worry about waterborne materials or corrosion. The wide lid opening makes filling and refilling a snap. The Bandit offers all the features you need in a 2 quart. Also available with an air driven rotary agitator that includes a stainless shaft and propeller.

Tank

The 2.5 gallon, non-ASME, pressure tank (also known as a pressure pot) can be configured with either single (51-201) or dual regulators (51-202) and a no-pneumatic agitation (mixer). The tank is constructed of heavy gage steel with a baked on enamel finish and has wheels for maneuverability or optional stationary feet.